Mangalyaan recreated

Author : Dhiraj Thakre

Model of mangalyaan

A paper model of mangalyaan (MOM ) by Dhiraj

The powerful cryogenic stage of GSLV Mk III enables it to place heavy payloads into Low Earth Orbits of 600 km altitude.

may be you would see this kind of spacecraft somewhere around the mars .But here is paper model of “Mangalyaan ” also called as MOM ( mars orbitor mission ) it’s the first mars mission done by india . MOM mission was cheapest mars mission done by any other organization. The mission has highly elliptical orbit of 420 km to 72000km. On 24 September 2018, MOM completed 4 years in its orbit around Mars, although the designed mission life was only six months. Over these years, MOM’s Mars Colour Camera has captured over 980 images that were released to the public. The probe is still in good health and continues to work nominally with its all 5 payloads .

The other one is model of india’s haviest rocket GSLV mk 3 has payload capacity of 8 ton to low earth orbit (LEO) and 4 ton to geosynchronous transfer orbit (GTO). In model u can see GSLV Mk III uses two S200 solid rocket boosters to provide the huge amount of thrust required for lift off. And the middle one is powerful cryogenic stage of GSLV Mk III enables it to place heavy payloads into Low Earth Orbits of 600 km altitude.  For this model I have used completely paper work ,u can see three solar panels & one radio antenna there in spacecraft , and all three stages on rocket !